Home

Firmware-update: OpenWrt 25.12.2

Versie 25.12.2 van OpenWrt is uitgekomen. OpenWrt is alternatieve opensourcefirmware voor een groot aantal verschillende routers en embedded devices. Door middel van het apk-packagemanagementsysteem is er de mogelijkheid om zelf te bepalen wat de router allemaal wel en niet kan. Ook op GoT zijn er diverse mensen actief mee bezig: zie daarvoor dit topic. Bijwerken van de versie kan met een Attended Sysupgrade, handmatig met een voorgecompileerde firmwareversie van het apparaat dat je gebruikt of compileer je eigen variant met de firmwareselectie. De changelog voor deze uitgave kan hieronder worden gevonden.

Device support
  • airoha: rename kernel module kmod-pwm-an7581 to kmod-pwm-airoha — users with this module explicitly installed need to reinstall under the new name
  • apm821xx: fix U-Boot environment definitions for NETGEAR WNDR4700, Western Digital MyBookLive, Meraki MR24 and Meraki MX60; fix PCIe boot failure on Meraki MX60
  • ath79: fix initramfs boot for Huawei AP5030DN and AP6010DN
  • ath79: fix VLAN CPU port tagging on 2-CPU-port devices (affects several dual-CPU switch configurations)
  • ath79: remove incorrectly included WiFi packages from Mikrotik RB750r2 (device has no WiFi hardware)
  • ipq40xx: fix ART partition name for Linksys Velop WHW03 V1 — restores correct WiFi calibration data access
  • ipq40xx: fix MAC address reading for Linksys devices using eMMC-based NVMEM
  • lantiq: xrx200: fix failsafe mode on BT HomeHub 5A — LAN ports 1 & 2 now work correctly in failsafe (#22480)
  • mediatek: Bananapi BPI-R4: fix SFP+ electric module support — modules that stopped working after a snapshot upgrade are now functional again (#19878)
  • ramips: fix kernel decompress error that bricked ELECOM WRC-X1800GS on 25.12.0 (#22270)
  • ramips: fix initramfs kernel load address for TP-Link EAP615-Wall v1
  • ramips: fix MAC address assignment for Xiaomi Mi AC2100
  • realtek: fix D-Link fan control script
    • WiFi fixes and improvements
  • wifi-scripts: fix 160 MHz channel width configuration — hostapd was not correctly configured for 160 MHz, preventing its use (#22481)
  • wifi-scripts: fix SU beamformee antenna count — incorrect count was passed to the driver
  • hostapd: fix memory leak in Radio Resource Management (RRM) ubus interface
  • mac80211: ath12k: add thermal sensor support for QCA/IPQ devices
  • mac80211: ath9k: fix GPIO mask handling from device tree
  • mt76: fix severe WiFi latency regression (up to 30+ seconds) on 2.4 GHz introduced in 25.12.1 — affected many MediaTek devices including OpenWrt One, Zyxel EX5601, ASUS RT-AX53U, Xiaomi AX3000T/AX6000, Cudy WR3000/X6, GL Flint 2 and others (#22491)
  • mt76: multiple further stability fixes for MediaTek WiFi chipsets (MT7615/MT7915/MT7996/MT7992/MT792x):add per-link beacon monitoring for MLO (Multi-Link Operation)fix MT7996/MT7992 link handling during MLO station add/removefix scan work requeue race with spinlock
  • add per-link beacon monitoring for MLO (Multi-Link Operation)
  • fix MT7996/MT7992 link handling during MLO station add/remove
  • fix scan work requeue race with spinlock

    • Source: Tweakers.net

    Previous

    Next